The iPV Vesta integrates the new SXi-Q Temperature Curve technology into the proven iPV platform which runs off two 18650 batteries (sold seperately) and housed in a beautifully designed chassis with accenting textures. SXi-Q Intelligent Temperature Curve technology featuring a sophisticated algorithmic calculation that allows users to set, fine tune, and save 5 output curves.

YiHi's highly regarded temperature control technology has native support for standard TC heating elements, and TCR functionality with Joule and Degree based settings. The face mounted OLED screen and adjustment buttons are perpendicular to the oversized firing button allowing for easy one handed operation. These chips are known for their precise operation at a much lower price point than DNA mods. In this case, the mod is built with the latest Yihi 410 chip board which allows power output up to 200 watts and surely features accurate temperature control that is compatible with all coil types. At the least, the device will include three variable temperature modes, a TCR mode and an ability to fire with low resistance, down to probably 0.05ohm.

What is a fact is that the IPV Vesta mod is built with the SXi-Q Intelligent Taste Curve system which ensures the most precise output thanks to its one-of-a-kind algorithms. And, the unit will feature a wide range of safety features such as reverse polarity protection, short circuit protection, low battery warning, low resistance protection and overheat protection. The Pioneer4You iPV Vesta 200W TC Box Mod presents a modernized workhorse device, integrating the latest YiHi SX-410 Chipset capable of outputting up to 200W paired with one of the most sophisticated temperature control suite in a streamlined chassis. The architecture structural is design to fit comfortably in-hand, constructed in a durable Alloy element with soft curvature contours.

From a design point of view, the Vesta looks sleek with curved corners and an ergonomic form factor. Its dimensions come in at 40mm x 95mm x 35mm and you can get the mod in all black or in a combination of red/black. The OLD screen is intuitive with an organized matrix that provides essential data at a glance, with two adjustment buttons positioned on top to make it easy to adjust the device with a single hand. The iPV Vesta is the latest to showcase the latest YiHi SX-410 Chipset, supporting Ni200 Nickel, Titanium, and Stainless Steel heating elements.

The onboard technology also utilizes a brand-new Taste Mode and SXi-Q Temperature Curve, optimizing performance with precision output adjustments to provide a whole new flavor experience. The iPV Vesta 200 is powered by dual high-amp 18650 batteries (sold separately), accessed via hinged battery cover for efficient replacement. The firing button is located on the side, while the adjustment buttons are located on the front, above the OLED display. The screen’s menu is in a horizontal configuration and features indicators for current wattage/temperature, voltage, resistance and two bars that show the current charge levels of each cell.

At the top of the mod, there’s a 510 threaded connection bezel for flush & easy atomizer installs. Maintaining the stellar performance of Pioneer4You's advanced technology, the iPV Vesta 200W TC Box Mod provides a dependable workhorse device that caters to modern demands. While detailed specs are not available yet, this mod with the latest Yihi chip may operate as well as any DNA mod, but at a much cheaper price! If you liked the IPV 400 or IPV 8, then perhaps you’ll love the IPV Vesta box mod.

tags:IPV Vesta,