Produced by Tigertek, this Springer X RDA tank is a very unique RDA with a screwless deck that you don't need a screwdriver or Allen wrench to get the wire fixed on the deck. Measures 24mm in diameter and 42.5mm in height (42.5mm with Ultem bore drip tip, and 43.5mm with Derlin drip tip), it comes with a gold-plated deck. With four adjustable holes, Springer X RDA is suitable for different types of coils, no matter single or dual. Also, it comes with both Ultem bore drip tip and Derlin drip tip for different needs.

Many manufacture is trying to upgrade the RBA to a better and easier building, trying to build the coil without using any tools. Here today would like to do a brief review on the newly come RDA, Springer X by Tigertek. This RDA uses spring to lock the coil instead of using screws. The TigerTek Springer X RDA is a new dropper from a new company who has instantly went down that not so used path of spring tensioned posts. Posts that do not require the use of screwdrivers of allen wrenches to tighten the coils down.

Take apart the RDA. This Springer X RDA is more like other RDAs in construction. Top cap and deck, with sleeve for air flow control. The most outstanding part of the RDA is the building deck. It’s a bit larger than others, featuring 2 square post, no screw for fixing the coil. Design in dripki interesting enough, and the eye catches a 810th Drip-type, made of heat-resistant plastic ULTEM. Includes an additional Drip-type, but from Delrin. I must say that Springer the X the RDA - a rather large "XRD shka" and its height with standard Drip-type is 37,8mm .

The top cap has wide range for adjusting the airflow. With curve design and generate the vape through the drip tip. This kind of design brings better flavor and prevent the oil split.Springer X RDA received side airflow, adjustable rotation of the top cap. Airflow is in the form of elongated holes, which, by the way, have different widths that allow precisely enough to rebuild the necessary tightening are tight. There is also the possibility of blowing a spiral.

As for the installation of coils, in Springer the X the RDA , as has been said above, use the rack without screws. Spacers have a plurality of holes for different thicknesses of legs helices and biased sufficiently below powerful springs, which allows no fear of poor contact. In order to fix the spiral you must click on the tabs on top of themselves.

Press hard and you can match the coil hole for locking the coil. The spring is strong and no need to worry the locking. You can use the bottom 2 small holes for normal coil build and use the 2 upeer hole for trick coils.Use the Allen Key in the package and you can take the post apart. The conducting post is constructed with the out shield, inner core, spring and the fixing screw. Some was concerned about that the resistances may fluctuate. But after tested and confirm that the resistance won’t flutuate by this design.

tags:TIGERTEK Springer X RDA, newest rda