Hello everyone , today Kanger has launched a lot of special kits here and this one may be the most attractive. Kanger was able to construct before a better method of filling an RBA with e-Juice without any hassle, through the method called Squonk. But it seems the squeezable bottle wasn’t good enough in Dripbox Kit, so they are able to construct a better material to utilize this method by using a pump cap bottle. Contained within the DRIPEZ Mod is a large glass bottle with a pump cap which connects to a tube that sends the e-Juice right to the RBA. An easy and fancy way to wet your wick with e-Juice without the traditional fills.

Including the RDA, the entire bundle measures 127mm x 50.8mm and can be purchased in silver or black. Inside the mod section, you will find a 15ml e-juice bottle that is easily refilled, without hassles. But, instead of squeezing the bottle to direct juice to the atomizer, you push down on the brand new pump cap which is located adjacent and directs liquid to the atomizer. This makes wicking your cotton easier than ever. Kangertech is here to introduce a very unique product named the DRIP EZ Kit. The DRIP EZ features a e-liquid pump which is placed on top of the included bottle. A tube connects directly from the pump to the DRIP EZ RBA which allows e-Liquid to be delivered directly into your cotton.

The concept is very similar to the "squonker" style kits such as the Dripbox. The DripEZ is a new squonker starter kit by Kangertech. It is built with an internal 15ml bottle that directs e-liquid to the DripEZ RDA via a unique juice pump It is a very similar product to Kanger’s Dripbox, except with the DripEZ, you also have the ability to use any build or tank instead of the included atomizer. One difference is that the DRIP EZ mod may be used with any other 510 threaded tank. The DRIP EZ mod features a variable wattage output from 5 to 80 watts and also supports Nickel 200, Titanium and Stainless Steel wire in temperature control mode. The DRIP EZ mod requires (1) 18650 high amp battery (sold separately) and features a Micro USB charging port.

Another cool feature about the Kanger DRIPEZ is its rebuildable coils it has a SCREWLESS Clap Post Deck for easier replacing cotton wicks. You may press down on the Clap Posts to release and change your wicks. No need to hassle yourself with screws anymore due to this screwless design. The DRIPEZ supports replaceable 0.2ohm cotton kanthal drip coils which are easily replaced or can be rebuilt to your own personal preferences.

E-liquid is simply refilled using the e-liquid pump to saturate your cotton and is now ready to be vaped for massive flavor. The DRIP EZ RBA features a screwless two post deck for easier and improved builds. You may press down on the posts to release and change your coils. No need to hassle yourself with screws anymore due to this screwless design. The DRIP EZ supports replaceable 0.2ohm cotton kanthal drip coils which are easily replaced or can be rebuilt to your own personal preferences.

Sold in Silver or Black, the DRIPEZ features a variable wattage output from 5 to 80 watts and also supports Nickel 200, Titanium and Stainless Steel wire in temp control mode. The DRIPEZ requires one (1) 18650 battery (which customers are responsible for installing) and features a Micro USB port for firmware upgrade from 80W to 100W.

The Kanger DRIP EZ Kit uses similar technology and design to the Dripbox Kit, except that there is no plastic bottle involved. You do not need to squeeze the e juice reservoir, so Kanger was able to construct it from better material which is good for flavor. The bottle top sticks out a little bit from the frame. How does vapor juice get into your tank without squeezing? That is as easy as pressing a button, only this one activates a pump.

It was right there under everyone’s noses all along, yet who would have thought to apply such an easy mechanical method to the Squonk Mod style? The pump on top of a large bottle contained within the Drip EZ mod is connected to a tube. This sends e juice right to the deck.The mod is also made with the latest technology and operating system which results in easy menu navigation and simple interchanging between modes. The DripEZ mod is capable of up to 80 watts of power and variable temperature operation from 200°F to 600°F with nickel, stainless steel and titanium coil types. The mod should be able to fire the majority of atomizers, as long as it has a resistance of 0.1Ω or higher. There’s also a few safety features built into the mod which include low resistance protection, high temp protection and low battery warning.